funiper防火墻日志如何設置

　　juniper防火墻日志怎么樣設置才最有效，小編來教你!下面由學習啦小編給你做出詳細的juniper防火墻日志設置方法介紹!希望對你有幫助!

　　juniper防火墻日志設置方法一：

　　以遠程撥號(xauth)為例：

　　netscreen_isg1000-> get event include 120.31.240.98

　　Date Time Module Level Type Description

　　2008-09-14 10:57:13 system info 00536 IKE<120.31.240.98> Phase 2 msg ID

　　<6c0f2afe>: Completed negotiations

　　with SPI <3eab9265>, tunnel ID< 45468>,

　　and lifetime <3600> seconds/<0> KB.

　　2008-09-14 10:57:13 system info 00536 IKE<120.31.240.98> Phase 2 msg ID

　　< 6c0f2afe>: Responded to the peer's

　　first message.

　　2008-09-14 10:57:13 system info 00536 IKE<120.31.240.98>: XAuth login was

　　passed for gateway< Test_Gateway>,

　　username , retry: 0, Client

　　IP Addr<11.2.2.70>, IPPool name:

　　< _TEST_POOL>, Session-Timeout:<0s>,

　　Idle-Timeout:<0s>.

　　2008-09-14 10:57:12 system info 00536 IKE<120.31.240.98>: XAuth login was

　　refreshed for username at

　　< 11.2.2.70/255.255.255.255>.

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received initial

　　contact notification and removed Phase

　　1 SAs.

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98> Phase 1: Completed

　　Aggressive mode negotiations with a

　　< 28800>-second lifetime.

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98> Phase 1: Completed

　　for user .

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received initial

　　contact notification and removed Phase

　　2 SAs.

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received a

　　notification message for DOI< 1>

　　< 24578>< INITIAL-CONTACT>.

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received a

　　notification message for DOI< 1>

　　< 24577>< REPLAY-STATUS>.

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98> Phase 1: IKE

　　responder has detected NAT in front of

　　the remote device.

　　2008-09-14 10:57:08 system info 00536 IKE<120.31.240.98> Phase 1: Responder

　　starts AGGRESSIVE mode negotiations.

　　Total entries matched = 12

　　而不要使用以下命令：

　　netscreen_isg1000-> get event | in 120.31.240.98

　　2008-09-14 10:57:13 system info 00536 IKE<120.31.240.98> Phase 2 msg ID

　　2008-09-14 10:57:13 system info 00536 IKE<120.31.240.98> Phase 2 msg ID

　　2008-09-14 10:57:13 system info 00536 IKE<120.31.240.98>: XAuth login was

　　2008-09-14 10:57:12 system info 00536 IKE<120.31.240.98>: XAuth login was

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received initial

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98> Phase 1: Completed

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98> Phase 1: Completed

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received initial

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received a

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98>: Received a

　　2008-09-14 10:57:09 system info 00536 IKE<120.31.240.98> Phase 1: IKE

　　2008-09-14 10:57:08 system info 00536 IKE<120.31.240.98> Phase 1: Responder

　　特別說明：120.31.240.98是發起方公網IP地址。

　　juniper防火墻日志設置方法二：

　　一般用cli查看

　　先定義一個traceoption的文件名，和需要記錄的log類型，

　　然后再在策略的最后面then的地方加上log記錄屬性。

　　然后用命令show log 【你taceoption定義的log名】

　　web查看也是需要用命令去定義，然后再在web的system文件夾下面去找這個log文件名，很麻煩

　　juniper防火墻日志設置方法三：

　　普通日志show log message

　　特殊日志需要定義類型

　　SRX 抓包

　　debug：跟蹤防火墻對數據包的處理過程

　　SRX跟蹤報文處理路徑的命令：

　　set security flow traceoptions flag basic-datapath 開啟SRX基本報文處理Debug

　　set security flow traceoptions file filename.log 將輸出信息記錄到指定文件中

　　set security flow traceoptions file filename.log size 設置該文件大小，缺省128k

　　set security flow traceoptions packet-filter filter1 destination-prefix 5.5.5.2 設置報文跟蹤過濾器

　　run file show filename.log 查看該Log輸出信息

　　看了“ funiper防火墻日志如何設置”文章的還看了：

1.360防火墻日志在哪里

2.如何設置DDOS防火墻各項參數

3.防火墻配置命令是怎么樣的

4.cisco防火墻怎么樣設置最好

5.h3c防火墻如何設置adsl

6.ARP防火墻參數設置方法有哪些